Own production, professional woven labels, printed textile labels, carelabels, hangtags and much more ..


User Instructions

For long-term enjoyment of your ironing labels, follow the instructions below carefully. Pay attention to the ordered type of label (flex material or cotton/polyester).

Ironing labels with blue application tape (flex material):
1)
Set the iron to the hottest setting, without any steam.
2)
Cut a label from the strip.
3) Remove the label,
including the blue application tape*, from the backing sheet
    and place it, with text up, to the desired location on the fabric.
4) Cover the label with a tea towel and firmly press the heated iron for
    approximately 20-40 seconds on a
hard, smooth surface.
5) Remove immediately after ironing gently the
blue protective (possibly with
    tweezers), let the label cool and check if it sticks.
6) In case the label comes off, again place the
blue coating on top of the label and
    repeat steps 4 and 5. Check that the iron is hot and, if necessary, press the
    heated iron on top of the label for a bit longer and with more pressure.
*Extra protection and it keeps the label in place while ironing!


Ironing labels Flex Material - provided with protective sheet:

  1. Set the iron to setting 3 (cotton), without any steam.
  2. Get a label of the semi-transparent backing and place it, with text up, to the desired location on the fabric.
  3. Cover the label with the included protective sheet* and firmly press the heated iron for approximately 10 seconds on a hard, smooth surface.
  4. After ironing carefully remove the baking sheet, let the label cool and check if it adheres.
  5. In case the label comes off repeat steps 3 and 4. Check the heat of the iron. 

*For best results, your also place a tea towel on the protective sheet!


Ironing labels Cotton/Polyester:

  1. Put the iron on the hottest setting, without steam.
  2. Place a label with the text up to the desired position on the fabric.
  3. Place a tea towel on the label and and firmly press the heated iron for approximately 35 seconds on a hard, smooth surface.
  4. After ironing carefully remove the tea towel, let the label cool and check if it adheres.
  5. If the label release something, repeat steps 3 and 4. Check the heat of the iron.

> Cotton/polyester iron-on labels become softer by washing and do not itch. They are almost indestructible, but you can also remove them by reheating the label with a tea towel and hot iron. Then you can take them out again.


Please note: Flex material iron-on labels can be used on fabric such as cotton, cotton/polyester and polyester/acrylic; but they are not suitable for fabrics that have a water repellent or dirt resistant coating, (coarsed) knitted fabrics, spandex or (very) movable surfaces because the label cannot hold itself properly.


Important:

The durability of our labels also depends on the heat*, the pressure of the iron, and its pressure duration. *A steam generator (steam iron with water tank) or self-thinking (thermostatless) iron does not get hot enough. Alternatively, use a heat press. Check the garment care label first!

Always wash the garments inside out and never ironing directly on the labels as applied,  but on the rear side thereof. Do not thumble dry. Do not dry clean.

During the washing from 60°C and by the use of fabric softener or wool detergent, or adding stain remover to the laundry, the labels may come off.

Temperature and time may vary by iron and type of fabric!


TEXTILE Adhesive xtra Labels Place this label on the existing wash care -/clothing label or on a similar smooth piece of fabric. Ultimate adhesive strength, the strongest of its kind. Optimum adhesion after 2 hours after application. After about 8 hours washing machine safe (< 60°C) and dryer resistant. Avoid fabric softener/wool detergent/stain removers.


Sewing Labels

We offer a very high quality Oeko-Tex Class 1 Labels of polyester, Nylon / polyamide and satin, printed with industrial quality equipment, for the best results.


High Coated Polyester labels are lightweight, have a high abrasion resistance and feel (even after washing) very soft. The label can be a bit static, but it remains in the form and does not discolour in direct sunlight.

High Coated Nylon (polyamide brand name) is lightweight and easy to fold. Nylon labels are strong, tear, crease and retain their shape. Not without reason the most widely used label type.

Satin polyester labels are extra fine woven, in a special way, making them shine and extra soft. These labels have a great printing result, which remains readable even after many washes. Unique to each application and great result!

Note: Cut edges may fray slightly. Double stitching or fold ends gives strength for best results, therefore additional space of approximately 8 mm each side to sew.

For all types of synthetic fibers, the same excellent performance with wash and cleaning durability usually applies.


Hint:

  • Sewing labels will held better when stitched on several points, the label will wrinkle less after washing.
  • Your sewing labels can be ironed. Please do so but watch the thermal state of the iron.
  • We do not recommend adding stain remover to the laundry, because the printing may blur.


Please let us know if we can be of further assistance, you can contact service@fabrictag.com.


HomeHome